QMS SC-200 Guia de Configuração descarregar pdf (Página 38)

"& %

"

c Insert the SCSI interface card connector into its opening in the interface

panel.

d Secure the SCSI interface card to the interface panel with the two larger

screws in the kit.

6 Reinstall the controller board.

Gently slide the controller board into the printer until it’s fully seated, and then

tighten the two screws.

7 Reconnect all interface cables.

8 Reconnect the power cord and turn on the printer.

»Note:

In compliance with UL guidelines, “The appliance inlet is considered to be

the main disconnect device.”

9 Print a startup page.

Check that the startup page lists the interface (SCSI) just installed under

“Options.”

""

»Note:

Installing the SCSI interface kit alone will not allow you to print via SCSI. See

chapter 5, “Storage Devices” for further information about attaching Jaz or Zip drives.

*--(1

The time-of-day clock provides time and date information on the startup page and in

the accounting data.



The optional time-of-day clock kit includes only the following:

 Time-of-day clock

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 89 90

Sem comentários

QMS SC-200 Guia de Configuração Página 38