QMS SC-100 Guia de Configuração descarregar pdf (Página 36)

4



5 Select the password(s).

»Note:

Keep in mind that the password(s) you select also protect the Admin mode

of Remote Console, available through QMS CrownAdmin or a telnet session.

6 Enable the password(s).

7 Save your changes and exit from the configuration menu.

8 Remove the security key, and store it in a secure location.

After you exit from the menu and remove the security key, the Installation menu is

removed from the control panel message window.

9 Press the Online button to put the printer back on line.

Installation/Operator Passwrd

Installation/Admin Password

Choices

Up to 16 characters (any letter, number, or symbol)

Default

Blank (no password)

Notes

Passwords are case sensitive and are entered as an alphanumeric string.

If you choose a password that is not 16 characters long, press the Select

button until you get to the rightmost character of the password field. Enter

the password character string the same as you would enter an

alphanumeric string. See chapter 2, “Printer Configuration” in the

Reference

for complete information on how to enter alphanumeric

characters.

Installation/Use Operator Pwd

Installation/Use Admin Pwd

Choices On

—Requires the correct password to access to the Administration and/

or Operator Control menus.

Off

—Does not require a password to access the Administration and/or

Operator Control menus.

Default

Off

Notes

Enter the passwords in the Installation/Operator Passwrd and Installation/

Admin Password menus.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Sem comentários

QMS SC-100 Guia de Configuração Página 36