QMS SC-100 Guia de Configuração descarregar pdf (Página 68)

+3%

)

&

Optional fonts, such as the 65 ProCollection fonts for the HP emulations on your

printer and other special PostScript fonts, are available as PostScript files on floppy

disks. This section describes how to download optional fonts from a floppy disk to the

printer’s hard disk.

»Note:

At least one hard disk (internal or external) must be present on your printer

before you can download a font. If more than one hard disk is available, the font

automatically installs itself on the disk with the most free storage space.

%!+

This procedure contains the instructions for downloading the fonts from a floppy disk

onto your printer’s hard disk.

1 Connect the computer to the printer’s parallel or serial port.

2 Turn on the printer, and wait for IDLE to appear in the message window.

3 Insert the font disk in your computer’s 3.5" disk drive, and change to that

drive (for example, if you’re using the A drive, type a:↵).

4 Send the fonts to the printer’s hard disk.

 If your computer and printer are connected through the parallel port, type

copy /b *.ps lpt

↵

where

is 1 to 3. (/b refers to binary files.)

 If your computer and printer are connected through the serial port, type

copy /b *.ps com

↵

where

is 1 to 4. (/b refers to binary files.)

5 When the downloading is complete, reboot the printer.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 99 100

Sem comentários

QMS SC-100 Guia de Configuração Página 68