QMS SC-100 Guia de Configuração descarregar pdf (Página 59)

:(3#

7#$!#$39#

9##+#0" # )

/'$

Once a network interface is installed, refer to the following for more information:

 For a CrownNet interface,

refer to the QMS

CrownNet Setup Guide

for information

on connecting to the network, installing the software, and configuring the interface

and the network. In addition, chapter 2, “Printer Configuration,” of QMS

CrownNet

System Administrator’s Guide

, provides complete configuration information.

 For a DECnet-TCP/IP interface, refer to the QMS

DECnet-TCP/IP Setup Guide

and

the

TCP/IP Protocol Option User’s Guide

 Your application and network documentation contain information on printing over

the network.

*$

Once a LocalTalk interface is installed, refer to the following for more information:

 For configuration information, refer to chapter 2, “Printer Configuration,” in the

Reference

manual.

 Your application and Macintosh documentation contain information on printing via

LocalTalk.

' $

Interface cables are not included with your printer. If you’re replacing a printer, you

may already have the necessary cables. If not, you’ll need to purchase the cables

from your QMS vendor or a local computer store.

To connect your printer to a single Macintosh, you must have

 An optional LocalTalk interface.

 Two PhoneNET-type transformer boxes: one with a DIN-8 connector for the

printer port and one with a DIN-8 connector for the Macintosh port

 An RJ11 (telephone) cable

 Two terminating resistors to close the open sockets left in the transformer boxes

after the connection is made

If you’re connecting the printer to an AppleTalk network with more than one Macin-

tosh, see your PhoneNET and Macintosh documentation for more information.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 99 100

Sem comentários

QMS SC-100 Guia de Configuração Página 59