QMS SC-100 Guia de Configuração descarregar pdf (Página 48)

&#0

9(#

-

.!

The system software in your QMS 3260/4032 Print System is stored in flash ROM,

read-only memory that can be erased and rewritten to “in a flash.” Updated system

software allows you to take advantage of future enhancements to the printer.

Updating the system software can be a real advantage for keeping your printer at the

level of the latest release. As your printer ages QMS will periodically add enhance-

ments to the system software to correct problems detected by our customers. Reload-

ing the system software can also be a method of troubleshooting your printer when it

has stopped working. See “Troubleshooting Printer Problems,” in the

Operations

man-

ual for information on downloading system software to a non-working printer.

Contact QMS or your QMS vendor for information on obtaining new system software.

See appendix A, “QMS Customer Support,” for locations and telephone numbers.

%++,-+

&'

Depending on the media that your new system software is delivered to you, the proce-

dure for sending the system software to the printer is basically the same as printing a

document. You can download the system software from the QMS website after con-

Downloading

via...

Host hard disk

space required

Notes

Parallel

1.5 MB Recommended method for downloading from a

non-networked computer.

No additional cables or changes of port settings

required.

Serial

1.5 MB For use when the parallel method is unavailable.

Requires either a null modem cable or a

standard serial cable with a null modem adaptor

attached.

Ethernet

1.5 MB Requires a 10BaseT/100BaseTX connection to

the printer’s resident network interface or a

connection to the optional network interface.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 99 100

Sem comentários

QMS SC-100 Guia de Configuração Página 48